Maintenance B Mechanic

Responsibilities

MUST BE ABLE TO WORK 12 HOUR ROTATING shifts, candidate will train on days and then be on nights 7:00 P.M TO 7:00 A.M. (2 on 2 off, 3 on 2 off, 2 on 3 off)

Job Summary

Works independently under general supervision to perform highly complex tasks such as to diagnose, repair, and maintain plant equipment and building.

Essential Functions

• Maintain equipment in plant Must be able to read, write, and comprehend written and verbal instructions, and should be able to comprehend simple to very detailed schematics, blueprints, diagrams, and the ability to setup and operate more complex equipment.
• Troubleshoot problems and make repairs in the areas of his specialties either from experience or with the aid of manuals, wiring diagrams, etc.
• Use basic shop math, including fractions and/or decimals.
• Must often use independent judgment to diagnose equipment problems and analyze best method for desired results.
• Must have a high degree of manual dexterity and be mechanically inclined.
• Must be able to maintain expected quality levels.
• Comply with all site required policies and procedures including but not limited to: EHS, Quality, Code of Conduct and the Wichita Falls Employee Handbook.
  
  

Job Responsibilities

• Selects proper tools and parts with the aid of blueprints, schematics, or diagrams when available.
• Uses a variety of testing devices such as leak detectors and electrical instruments.
• Maintains department in a clean and orderly manner and cleans around area where equipment was repaired in a production department.
• Performs other duties as required.
• Complies with all EHS rules related to the work environment.
• Works Overtime when needed.
  
  

ENVIRONMENTAL HEALTH AND SAFETY RESPONSIBILITES

• Comply with all department, facility, corporate and regulatory EHS regulations.
• Requires wearing safety glasses, flame retardant clothing, earplugs, Metal tarsal shoes, Hard Hats, Respirator, Caustic Suit and other department specified PPE
• Report all job-related illness and injuries (Per Employee Handbook).
• Report all safety, health and environmental concerns to your supervisor in a timely manner.
• Attend all EHS training.
  
  

PHYSICAL DEMANDS/EQUIPMENT USED

• Physical Demands:
  
  

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Employee is required to execute the following:

Depending upon the task, performs work requiring from minimal physical effort to heavy laboring operations.

Work requires some constant walking, standing, heavy lifting, carrying and handling.

Must pass Jaeger 2 eye exam.

Frequently reaching for nearby items.

Occasionally use fine manipulation, use a keyboard and mouse.

Occasionally lifting and carrying to the waist-to-chest high level, carrying items with two hands.

Frequently Gripping and pinching.

Occasional stair and ladder climbing.

Be able to crawl, squat, balance, sustain bending, reach far and overhead.

Be able to finger Press.

Be able to push, pull and twist.

Be able to lift from floor-to-waist and chest-to-overhead.

Moderate lifting 50 lbs.

Non-Medical Surveillance Related EHS Training:

Fall Control

Confined Space Entry

Machine Guarding

Flammable/Combustible Liquids & Compressed Gases

Hazardous energy sources (LTV)

Electrical

Equipment Used:

Robots

Aerial Lift

Walk Behind Fork Truck

Fork Truck

Pallet Jack

Maintenance equipment, tools, and testing devices.

Training:

Additional trade training in the mechanical or electrical field is beneficial.

Work Environment:

Exposure to Nickel, Heat, KOH and RCF.

May be exposed to noise, oil, dust, fumes, chemicals, heat, cold, or wetness.

Some exposure to changes in seasonal temperatures.

Medical Surveillance Requirements

• Audiogram
• Vision
• Heat Stress
• Mobile Equipment
  
  

Qualifications

BASIC QUALIFICATIONS:

• High School Diploma or GED from an accredited institution.
• Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.
  
  

PREFERRED QUALIFICATIONS:

• Experience working in a manufacturing environment.
• Basic Computer skills.
• Prefer to have working knowledge of plant equipment, its operation, and how to repair.
• Prefer experience with Steel work (cutting, welding, and fabrication).
• Prefer experience Piping of air and gas lines.
  
  

About Us

About Howmet Aerospace

Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $6.6 billion in revenue in 2023, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2023 Environmental Social and Governance report at www.howmet.com/esg-report .

Follow: LinkedIn , Twitter , Instagram , Facebook , and YouTube .

Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics.

If you need assistance to complete your application due to a disability, please email [email protected]

About The Team

The Howmet engines business produces world-class aerospace engine components, including investment castings, fasteners, rings and forgings. Our vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts enable the next generation of quieter, cleaner and more fuel-efficient aerospace engines. Able to supply more than 90% of structural and rotating aerospace engine components.